If you ever wanted to fly the TBS Discovery Pro with the gimbal 'disabled', this bracket will lock the gimbal so that it is perpendicular to the frame. Both tilt and roll axis is locked.
The bracket clips in place on the right side of the gimbal. First feed the two sligtly tilted pads from the back of the gimbal cage through toward the right and position the curved indent with the back of the gimbal cage. Lastly, align the notch with the bottom frame and center the bracket.
Make sure to disconnect the gimbal motor cables or set the Power setting in SimpleBGC to 0.
Note: This product is 3D printed and will have minor insignificant extrusion lines/defects.
- Product ID: TBSPRO-LOCK
- Weight: 3.5 grams